ICON A5 MM : Propulsion : Engine : Oil System : Maintenance Instructions : A5 Specific Oil Change Procedures
A5 Specific Oil Change Procedures
100016-00
There are unique oil change procedures for the A5. These steps are used to drain the oil.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Specific Tools Required
3/8” Drain Hose
Parts Required
None
Aircraft System and Number
13—Propulsion
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Connect a 3/8”x10’ drain hose to the drain valve located on the bottom of oil tank and the other end to a bucket or oil receptacle.
2. Place padding on ground and carefully lower tail until tail jacking point fully rests on padding.
3. Open valve and refer to the Maintenance Manual: (Line Maintenance) for Rotax Engine Type 912 i Series for complete oil change directions.
Verification Method
This task has been completed when oil is changed.