Cut Tubing to Length
100118-00
Use the following to cut the tubing to length.
Applicable Aircraft Serial Numbers
00139+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
5x ME000610 (STATIC LABEL)
3x ME000609 (PITOT LABEL)
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Cut the following lengths of tubing:
a. 1x28.5”±0.5”
b. 4x5.5”+0.5/-0.0”
c. 2x1.75”+0.5/-0.0”
d. 1x10.5”±1.0”
e. 1x15.5”±0.5”
f. 1x11.5”±0.5”
g. 1x8.5”±1.0”
2. Apply the following labels a minimum of 1” from the end of each of the following tubing lengths:
a. “STATIC”—3x5.5” and 2x11.5”
b. “PITOT”—5.5”, 10.5”, and 28.5”
Verification Method
Verify lenghts of tubing match measurements listed in Step 1.
Parent topic