ICON A5 MM : Wing : Wing General Maintenance : Exterior/Interior Wing Control Surfaces
Exterior/Interior Wing Control Surfaces
100319-00
The following can be used for the general inspection of the exterior and interior wing control systems.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
14—Wing
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Ensure rigging is complete on flaps. (Inspect Flap Rigging)
2. Ensure rigging is complete on ailerons. (Inspect Roll Rigging)
3. Ensure all threaded fittings and attachments for flight controls have at least 3 full threads visible.
4. Verify all threaded fasteners for flight controls are secure.
5. Check flight control surfaces for axial and radial hinge play.
Verification Method
Ensure each step above is completed to verify wing control surfaces.