ICON A5 MM : Instruments (and Avionics) : Instruments and Avionics General Maintenance : Install Multiple Systems Controller (MSC)
Install Multiple Systems Controller (MSC)
100763-00
Use the following procedure to install the Multiple Systems Controller (MSC).
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
T15 Torx Driver
Parts Required
ICA011651 MULTIPLE SYSTEMS CONTROLLER
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
None
Task Instructions
2. Install the replacement MSC and reconnect all cabling and plumbing.
3. Make connections from the main wire harness to the MSC.
a. Connector D9052P from main wire harness to D9052J on MSC
b. Connector D9030J from main wire harness to D9030P on MSC
c. Connector D9111J from main wire harness to D9111P on MSC
d. Connector D9091P from main wire harness to D9091J on MSC
4. Perform a Pitot/Static/AOA System Leak Check (see Related Information) to confirm no leaks at the MSC connections before proceeding.
5. Reinstall the DAC and its electrical connections. (Install Digital-to-Analog Converter (DAC))
6. Install the Right Instrument Panel Top Panel. (Right Instrument Panel Top Panel Installation)
Verification Method
Power up and check all avionics and electrical systems for proper function.