ICON A5 MM : Propulsion : Propeller : Propeller General Maintenance : Propeller Removal for Replacement
Propeller Removal for Replacement
100481-01
Instructions for removing only the Sensenich propeller for replacement. If the propeller is not being replaced and an entire propeller subassembly needs to be removed, see Remove Propeller Assembly from Engine.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
13—Propulsion
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. If required, remove engine cowlings. (Remove Engine Cowlings)
2. Remove and retain hardware securing aft spinner.
3. Remove hardware securing propeller hub to shaft extension.
4. Remove propeller from shaft extension.
Verification Method
Visually verify propeller is not mounted to engine.