Remove Dome Light Switch
100498-00
Use the following task to remove the dome light switch.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
A&P
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
03—Electrical System
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove the overhead console bezel. (Overhead Console Component Replacement)
2. Carefully remove the connectors from short and long posts on SWITCH, SPST, 30A. (Figure 58)
3. Remove the retaining nut and remove the dome light switch from teh overhead console.
Verification Method
The task is completed when the switch has been removed.