ICON A5 MM : Wing Fold Mechanism : Wing Fold Mechanism General Maintenance : Remove Double Lock Wing Hang Assembly
Remove Double Lock Wing Hang Assembly
100499-00
Use the following procedure to remove the LH or RH double lock wing hang assembly.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
15—Wing Fold Mechanism
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove screw securing trailing edge strobe light.
2. Remove trailing edge strobe light.
3. Remove set screw from TE light assembly holding cable in position.
4. Remove snap ring on LE of wing securing double lock assembly.
5. Use flat tip on socket assembly to remove assembly from wing.
Note: 
Attach a long piece of string to the button side of the cable assembly so the parts can easily be fed back through upon assembly.
6. If wing hang housing needs repaired, contact ICON. (Continued Operational Safety Reporting)
Verification Method
The double lock wing assembly has been removed.