ICON A5 MM : Wing : Wing Lock : Maintenance Instructions : Wing Lock Switch Mounting Plate Removal
Wing Lock Switch Mounting Plate Removal
100641-00
Use the following procedure to remove the wing lock switch mounting plate.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
14—Wing
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove the wing lock handle using the procedure. (Wing Lock Handle Removal)
Figure 458. Remove Wing Lock Switch Plate
2. Use a T15 Torx drive to remove the three 8-32 truss-head screws attaching the wing lock switch plate assembly to the fuselage BL38 Rib. Figure 458
3. Pull the plate assembly out of the BL38 Rib and disconnect it from the aircraft electrical harness
Verification Method
The procedure is complete when the wing lock switch mounting plate has been removed.