Correct all unsatisfactory items prior to flight S=Satisfactory, U=Unsatisfactory | S | U | Comments | |
|---|---|---|---|---|
1 | Check that battery is free of corrosion and secure | |||
2 | Perform battery capacity test in accordance with latest release of Concorde Maintenance Manual | |||
3 | Perform ELT inspection/functional check. Record ELT battery expiration date. ELT Inspection
and Function Check Note: ELT inspection/functional check required annually per 14 CFR 21.207(d). Not required during a 100-Hour Inspection. | |||
4 | Inspect antenna mount and wiring for security | |||
5 | Inspect ELT antenna for corrosion. (ELT Antenna
Corrosion Inspection) | |||
6 | Check wires to battery ground | |||
7 | Inspect radio/leads/wires for attachment and security | |||
8 | Inspect wiring instrument panel for attachment and security | |||
9 | Check bilge pump for function, clear of debris. | |||
10 | Check wiring harness for chafing/security/condition.Inspect, Repair, and Secure Wiring Harness with Signs of
Chafing | |||
11 | Check for wire/connector strains | |||
12 | Calibrate AOA pressure transducer. Calibrate
AOA Pressure Transducer | |||
13 | Verify regulator B fan is operating with master power turned on | |||
14 | Inspect regulator B wires for browning near connector. | |||
15 | Inspect regulator A wire for browning near connector. Inspect Regulator Wires | |||
16 | Inspect Rotax fuse box for blown fuses and correct sized fuses are installed | |||
17 | Inspect overhead panel for blown fuses and correct sized fuses are installed.Replace
Overhead Console Fuses |