ICON A5 MM : Propulsion : Engine : Engine General Maintenance : Replace Engine Mount Isolators and Engine Locking Nuts
Replace Engine Mount Isolators and Engine Locking Nuts
100723-00
Use the following instructions to remove and replace the engine mount isolators and engine locking nuts.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
4X 94150-40 (ISOLATOR, ENGINE MOUNT)
Aircraft System and Number
13—Propulsion
Safety Equipment
As Needed
Consumables
F4TAPEBLACK as required (TAPE, SELF-FUSEING, SILICONE, .02 IN THK, 1 IN WIDE)
General Hose Replacement Notes:
1. Use the A5 Maintenance Manual as required to gain access to the affected engine mount isolators.
Task Instructions
1. Replace the subject engine mount isolators in accordance with Figure 366 and Inspect Engine Mount.
Figure 366. Engine Mount Isolators
Verification Method
Use Inspect Engine Mount verification method. Replace ECS Line Hose